Injection Foam Insulation
"I just wanted to take a moment to thank you, the guys that came to
our house Friday & Saturday to do the injection foam were great, can't say
enough about them very nice, very knowledgeable about the product and had no
problems explain what they were doing and why they were doing things the way
they were! Also after they left the first day & 2nd day you would have NO
idea i had any work done. Property was all cleaned up even took out there
shopvac to clean up outside around the house.. Keep up the great work with
your crews.. One last note we can noticed a HUGE difference already in our
1842 home. With the temp swings already we had this weekend, house only
dropped between 3-4 degrees & no drafts with some of the breezes we had too
this weekend... awesome job..."
Thanks,
Mike & Susannah
|
Eastern Contractor Services supplies and installs INJECTASEAL-MH,the most technically advanced
injection foam insulation product on the market today. INJECTASEAL-MH is a 2-part foam system that combines
a unique spray-dried polymeric resin with a foaming catalyst to produce a “dry” foam that is unmatched in
the industry.
When combined with compressed air using specialized equipment, the foam insulation flows
throughout the wall filling any irregular voids and hard-to-reach spaces resulting in a building that
is well-insulated, quiet and energy efficient.
Injectaseal foam products are Class I Fire-Rated and have been tested by certified laboratories
to comply with all international building codes and do not use any ozone-depleting chemicals as part of their
formulation. The blowing agent used for these foam products is compressed air.
Based on a hybrid, non-urea formaldehyde resin, INJECTASEAL-MH is specifically formulated for
the use in markets where UF foams are restricted or prohibited, such as California and New Jersey.
• Class I / Class A - Tested at 4-inch Thickness per ASTM E-84-10
• R-Value - 4.4/inch at 75°F per ASTM C-518-10
• R-14 in a 2x4 wall
• Permeability - 17.32 perm inch per ASTM E-96-05
• Contains 3 EPA Listed Antifungal Additives Including MOLD-CARE
Tank Foam UST Abatement™
Tank Foam™ Composition
Tank Foam UST Abatement™ is an inert, lightweight, pre-expanded foam designed for
permanently closing-in-place existing underground storage tanks. Tank Foam UST Abatement™ is
an excellent alternative to conventional materials such as sand, gravel and concrete because it
is a lightweight material that is easy and inexpensive to install.
Chemically, Tank Foam UST Abatement™ is a foamed tri-polymer, spray-dried,
aminoplast resin. Since it is pre-expanded, there is no danger of doing irreparable harm from
in-situ expansion of foam in the tank.
Click the links below for more information on Tank Foam UST Abatement™:
AIA Specs
MSDS TankFoam
Installation Procedures
|
